prove - Run tests through a TAP harness.
- prove [options] [files or directories]
- -v, --verbose Print all test lines.
- -l, --lib Add 'lib' to the path for your tests (-Ilib).
- -b, --blib Add 'blib/lib' and 'blib/arch' to the path for your tests
- -s, --shuffle Run the tests in random order.
- -c, --color Colored test output (default).
- --nocolor Do not color test output.
- --count Show the X/Y test count when not verbose (default)
- --nocount Disable the X/Y test count.
- -D --dry Dry run. Show test that would have run.
- --ext Set the extension for tests (default '.t')
- -f, --failures Show failed tests.
- -o, --comments Show comments.
- --fork Fork to run harness in multiple processes.
- --ignore-exit Ignore exit status from test scripts.
- -m, --merge Merge test scripts' STDERR with their STDOUT.
- -r, --recurse Recursively descend into directories.
- --reverse Run the tests in reverse order.
- -q, --quiet Suppress some test output while running tests.
- -Q, --QUIET Only print summary results.
- -p, --parse Show full list of TAP parse errors, if any.
- --directives Only show results with TODO or SKIP directives.
- --timer Print elapsed time after each test.
- --normalize Normalize TAP output in verbose output
- -T Enable tainting checks.
- -t Enable tainting warnings.
- -W Enable fatal warnings.
- -w Enable warnings.
- -h, --help Display this help
- -?, Display this help
- -H, --man Longer manpage for prove
- --norc Don't process default .proverc
Options that take arguments:
- -I Library paths to include.
- -P Load plugin (searches App::Prove::Plugin::*.)
- -M Load a module.
- -e, --exec Interpreter to run the tests ('' for compiled tests.)
- --harness Define test harness to use. See TAP::Harness.
- --formatter Result formatter to use. See TAP::Harness.
- -a, --archive Store the resulting TAP in an archive file.
- -j, --jobs N Run N test jobs in parallel (try 9.)
- --state=opts Control prove's persistent state.
- --rc=rcfile Process options from rcfile
If ~/.proverc or ./.proverc exist they will be read and any options they contain processed before the command line options. Options in .proverc are specified in the same way as command line options:
- # .proverc
- -j9 --fork
Additional option files may be specified with the
Default option file processing is disabled by the
Under Windows and VMS the option file is named _proverc rather than .proverc and is sought only in the current directory.
If you have a list of tests (or URLs, or anything else you want to test) in a file, you can add them to your tests by using a '-':
- prove - < my_list_of_things_to_test.txt
directory of this distribution.
If no files or directories are supplied,
looks for all files
matching the pattern
Colored test output is the default, but if output is not to a
terminal, color is disabled. You can override this by adding the
If the tests fail
will exit with non-zero status.
It is possible to supply arguments to tests. To do so separate them from prove's own arguments with the arisdottle, '::'. For example
- prove -v t/mytest.t :: --url http://example.com
would run t/mytest.t with the options '--url http://example.com';. When running multiple tests they will each receive the same arguments.
Normally you can just pass a list of Perl tests and the harness will know how
to execute them. However, if your tests are not written in Perl or if you
want all tests invoked exactly the same way, use the
- prove --exec '/usr/bin/ruby -w' t/
- prove --exec '/usr/bin/perl -Tw -mstrict -Ilib' t/
- prove --exec '/path/to/my/customer/exec'
If you need to make sure your diagnostics are displayed in the correct
order relative to test results you can use the
merge the test scripts' STDERR into their STDOUT.
This guarantees that STDOUT (where the test results appear) and STDOUT (where the diagnostics appear) will stay in sync. The harness will display any diagnostics your tests emit on STDERR.
Caveat: this is a bit of a kludge. In particular note that if anything that appears on STDERR looks like a test result the test harness will get confused. Use this option only if you understand the consequences and can live with the risk.
You can ask
to remember the state of previous test runs and
select and/or order the tests to be run based on that saved state.
switch requires an argument which must be a comma
separated list of one or more of the following options.
Run the same tests as the last time the state was saved. This makes it possible, for example, to recreate the ordering of a shuffled test.
- # Run all tests in random order
- $ prove -b --state=save --shuffle
- # Run them again in the same order
- $ prove -b --state=last
Run only the tests that failed on the last run.
- # Run all tests
- $ prove -b --state=save
- # Run failures
- $ prove -b --state=failed
If you also specify the
option newly passing tests will be
excluded from subsequent runs.
- # Repeat until no more failures
- $ prove -b --state=failed,save
Run only the passed tests from last time. Useful to make sure that no new problems have been introduced.
Run all tests in normal order. Multple options may be specified, so to run all tests with the failures from last time first:
- $ prove -b --state=failed,all,save
Run the tests that most recently failed first. The last failure time of
each test is stored. The
option causes tests to be run in most-recent-
- $ prove -b --state=hot,save
Tests that have never failed will not be selected. To run all tests with the most recently failed first use
- $ prove -b --state=hot,all,save
This combination of options may also be specified thus
- $ prove -b --state=adrian
Run any tests with todos.
Run the tests in slowest to fastest order. This is useful in conjunction
parallel testing switch to ensure that your slowest tests
start running first.
- $ prove -b --state=slow -j9
Run test tests in fastest to slowest order.
Run the tests in newest to oldest order based on the modification times of the test scripts.
Run the tests in oldest to newest order.
Run those test scripts that have been modified since the last test run.
Save the state on exit. The state is stored in a file called .prove (_prove on Windows and VMS) in the current directory.
switch may be used more than once.
- $ prove -b --state=hot --state=all,save
prove introduces a separation between "options passed to the perl which
runs prove" and "options passed to the perl which runs tests"; this
distinction is by design. Thus the perl which is running a test starts
with the default
. Additional library directories can be added
environment variable, via -Ifoo in
option to prove.
Normally when a Perl program is run in taint mode the contents of the
environment variable do not appear in
is often used during testing to add build directories
prove (actually TAP::Parser::Source::Perl) passes the
names of any directories found in
as -I switches. The net
effect of this is that
is honoured even when prove is run in
Plugins can be loaded using the
-P<i>plugin</i> syntax, eg:
- prove -PMyPlugin
This will search for a module named
, or failing
. If the plugin can't be found,
will complain & exit.
You can pass arguments to your plugin by appending
- prove -PMyPlugin=fou,du,fafa
Please check individual plugin documentation for more details.
For an up-to-date list of plugins available, please check CPAN:
Please see "PLUGINS" in App::Prove.