Pod::Simple::HTMLBatch - convert several Pod files to several HTML files
- perl -MPod::Simple::HTMLBatch -e 'Pod::Simple::HTMLBatch::go' in out
This module is used for running batch-conversions of a lot of HTML documents
This class is NOT a subclass of Pod::Simple::HTML (nor of bad old Pod::Html) -- although it uses Pod::Simple::HTML for doing the conversion of each document.
The normal use of this class is like so:
Note that this class also provides
(but does not export) the function Pod::Simple::HTMLBatch::go.
This is basically just a shortcut for
It's meant to be handy for calling from the command line.
However, the shortcut requires that you specify exactly two command-line
- % mkdir out_html
- % perl -MPod::Simple::HTMLBatch -e Pod::Simple::HTMLBatch::go @INC out_html
- (to convert the pod from Perl's @INC
- files under the directory ../htmlversion)
(Note that the command line there contains a literal atsign-I-N-C. This is handled as a special case by batch_convert, in order to save you having to enter the odd-looking "" as the first command-line parameter when you mean "just use whatever's in @INC".)
- % mkdir ../seekrut
- % chmod og-rx ../seekrut
- % perl -MPod::Simple::HTMLBatch -e Pod::Simple::HTMLBatch::go . ../htmlversion
- (to convert the pod under the current dir into HTML
- files under the directory ../htmlversion)
- % perl -MPod::Simple::HTMLBatch -e Pod::Simple::HTMLBatch::go happydocs .
- (to convert all pod from happydocs into the current directory)
These two values for indirs specify that the normal Perl @INC
This specifies that the input directories are the items in
This specifies that the director "somedir" is the input. (This can be an absolute or relative path, it doesn't matter.)
A common value you might want would be just "." for the current directory:
- $batchconv->batch_convert( "." , ...);
This specifies that you want the dirs "somedir", "somother", and "also"
scanned, just as if you'd passed the arrayref
[qw( somedir someother also)]
. Note that a ":"-separator is normal
under Unix, but Under MSWin, you'll need
instead, since the pathsep on MSWin is ";" instead of ":". (And
that is because ":" often comes up in paths, like
(Exactly what separator character should be used, is gotten from
, via the Config module.)
This specifies that you want the HTML output to go into the current directory.
(Note that a missing or undefined value means a different thing in
the first slot than in the second. That's so that
with no arguments (or undef arguments) means "go from @INC, into
the current directory.)
This specifies that you want the HTML output to go into the directory 'somedir'. (This can be an absolute or relative path, it doesn't matter.)
Note that you can also call
as a class method,
- Pod::Simple::HTMLBatch->batch_convert( ... );
That is just short for this:
- Pod::Simple::HTMLBatch-> new-> batch_convert(...);
That is, it runs a conversion with default options, for whatever inputdirs and output dir you specify.
The following are all accessor methods -- that is, they don't do anything on their own, but just alter the contents of the conversion object, which comprises the options for this particular batch conversion.
We show the "put" form of the accessors below (i.e., the syntax you use
for setting the accessor to a specific value). But you can also
call each method with no parameters to get its current value. For
returns the current value of
the contents_file attribute.
This controls how verbose to be during batch conversion, as far as
notes to STDOUT (or whatever is
select'd) about how the conversion
is going. If 0, no progress information is printed.
If 1 (the default value), some progress information is printed.
Higher values print more information.
This controls whether or not each HTML page is liable to have a little table of contents at the top (which we call an "index" for historical reasons). This is true by default.
If set, should be the name of a file (in the output directory) to write the HTML index to. The default value is "index.html". If you set this to a false value, no contents file will be written.
This specifies what string should be put at the beginning of the contents page. The default is a string more or less like this:
- <head><title>Perl Documentation</title></head>
- <body class='contentspage'>
- <h1>Perl Documentation</h1>
This specifies what string should be put at the end of the contents page. The default is a string more or less like this:
- <p class='contentsfooty'>Generated by
- Pod::Simple::HTMLBatch v3.01 under Perl v5.008
- <br >At Fri May 14 22:26:42 2004 GMT,
- which is Fri May 14 14:26:42 2004 local time.</p>
If true (the default value), we autogenerate some CSS files in the output directory, and set our HTML files to use those. TODO: continue
This sets what class is used for rendering the files.
The default is "Pod::Simple::Search". If you set it to something else,
it should probably be a subclass of Pod::Simple::Search, and you should
use that class so that's it's loaded before
Pod::Simple::HTMLBatch tries loading it.
- call add_css($someurl) to add stylesheet as alternate
- call add_css($someurl,1) to add as primary stylesheet
- subclass Pod::Simple::HTML and set $batchconv->html_render_class to
- that classname
- and maybe override
- $page->batch_mode_page_object_init($self, $module, $infile, $outfile, $depth)
- or maybe override
- $batchconv->batch_mode_page_object_init($page, $module, $infile, $outfile, $depth)
If you want to do some kind of big pod-to-HTML version with some
particular kind of option that you don't see how to achieve using this
module, email me (
) and I'll probably have a good idea
how to do it. For reasons of concision and energetic laziness, some
methods and options in this module (and the dozen modules it depends on)
are undocumented; but one of those undocumented bits might be just what
you're looking for.
Copyright (c) 2004 Sean M. Burke. All rights reserved.
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
This program is distributed in the hope that it will be useful, but without any warranty; without even the implied warranty of merchantability or fitness for a particular purpose.
Sean M. Burke